#1760

In terms of the choice of boat it usually comes down to what boat type works best on your machine.

#1760
Author: Charles A Bishop, Bishop Consulting
Email: CABishopConsulting@cabuk1.co.uk
Subject: In terms of the choice of boat it usually comes down to what boat type works best on your machine.

In terms of the choice of boat it usually comes down to what boat type works best on your machine. There will be a boat/wire combination that works best for your system giving a combination of boat lifetime and stability that suits your operating conditions. There is no set rule that will determine the optimum.

Back to top

Other Recent Questions

• We are having a problem laminating polyester and polypropylene.
• Vacuum deposition rates, throughput and thickenesses, and their relative economic importance
• When coating water-borne acrylic resin on bopet fillm and bopp film, the heatsealing strength of bopet is very poor <0.5N/CM but the heatsealing strength of bopp is good up to 2N/CM. WHY?
• View All

Technical Panel

In addition to AIMCAL members the following consultants participate on the AIMCAL Technical panel.
Edward D. Cohen
Eldridge M. Mount
James M. Wheeler
David Roisum
Larry Gogolin
Neil I. Steinberg
Edgar B. Gutoff
Timothy J. Walker
Charles A. Bishop

Ask AIMCAL Column

Questions from the Tech Q&A archive are featured in the
Ask AIMCAL Column
featured in
Converting Magazine.